Firestone QuickPrime Plus Primer, Gallon
Federal regulation requires this item to ship UPS Ground & can ONLY ship within the Continental USA
WE DO NOT SHIP THIS PRODUCT. IT IS AVAILABLE FOR LOCAL CUSTOMERS, LOCAL PICKUP, ONLY.
Firestone QuickPrimer Plus - Cleans Pond Liner:
Firestone QuickPrime Plus is designed to clean and prime Firestone PondGard EPDM Pond Liners and Firestone 45 mil EPDM Pond Liners prior to the application of:
- QuickSeam Cover Strip
- QuickSeam Splice Tape
- QuickSeam FormFlash
- QuickSeam Pipe Flashing
- QuickSeam Joint Covers
- QuickSeam Corner Flashing
Firestone QuickPrime Plus Method of Application
EPDM Pond Liner and other surfaces to be primed must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary.
Stir QuickPrime Plus thoroughly before and during use. QuickPrime Plus must be applied with a QuickScrubber or QuickScrubber Plus pad and handle using long back and forth strokes with moderate-to-heavy pressure along the length of the area until surfaces become gray in color with no streaking or puddling. Allow the QuickPrime Plus to flash off completely according to the touch-push test (usually less than 10 minutes, flash off time will vary depending on ambient air conditions) before applying QuickSeam products or Lap Sealant. Complete QuickSeam product or Lap Sealant application in accordance with Firestone Specialty Products specifications and details.
Firestone QuickPrime Plus Coverage Rate
Approximately 50- 100 square feet per gallon one side. Coverage rates for various are as follows:
- 3" QuickSeam Seam Tape: 100-150 linear feet/gallon
- 6" QuickSeam Cover Tape: 100-150 linear feet/gallon
- 9" QuickSeam Tape: 50-100 linear feet/gallon
LOT NUMBER INS-0417-0358 MFG 27/04/2017
for Safety Data Sheet
for Technical Data Sheet